Prices are tax included
A SINGLE BASE FOR ANY LAYING DIAGRAM
R.L.S. system is enhanced with the innovative "3D" base (patent pending).
In addition to performing the leveling function, the "3D" base creates both "+" and "T" escape on both sides of the tiles.
Thanks to the retractable spacer elements, the "3D" base can be positioned both on the crosses and on the sides of the tiles. Therefore, in the case of laying large sizes, for which the base alone in the crossings is insufficient to ensure peer leveling, the "3D" base is used in both positions.
The "3D" base can be used with the same wedges and the same pliers of the other bases of the R.L.S .. system
The planar configuration, with which the "3D" base appears, reduces transport volumes by 50% compared to standard R.L.S.
Before using, use a simple and quick movement to bring the "3D" base bridge vertically.
Minimum joint width (escape): 1.5 mm. (As required by UNI U87005510).
Tile thickness: 3 mm, maximum minimum 12 mm.